|
The Flex-TrackTM Dynamic Practice
System was designed and constructed using versatile, low
maintenance components, to ensure durability and
longevity in your practice system. The following is a
description of each component and guidelines on the use
and care of your system.
System Main-Frame. The Main-Frame is constructed of impact
modified, UV stabilized, thermoplastic. The
Main-Frame can be bolted down through the center mount
using a 3/8" diameter fastener (not included). The
Main-Frame has been designed with a drainage system for
outdoor use. The drainage ducts should be kept clean of
dirt and debris. A glide system has been inserted to
allow freedom of movement for the Virtual
TurfTM Insert. The entire
Main-Frame can be cleaned with water.
Stance Turf. The Stance Turf can be quickly and
easily rotated for maximum longevity in the stance area.
The section should be rotated frequently to prolong the
life of your stance area. When rotating your stance
section, maintain maximum clearance between the stance
section and the Virtual TurfTM Insert to prevent interference.
Tee Turf Insert.
The Tee Turf Insert is equipped with adjustable tees, which can be adjusted to a
variety of heights to suit your individual preference. Like the Sectional Stance
Turf, the Tee Turf Insert should be rotated to maximize wear.
Virtual Turf Insert.
The Virtual TurfTM
Insert is the turf covered "Spring" that "Flexes"
under impact to simulate a divot. The Virtual Turf Insert can be purchased
as a separate component to fit your Virtual Turf™ system.
Turf. All turf used throughout the Flex-TrackTM Dynamic Practice System is a
premium, 55-ounce, spike proof knitted nylon. Our turf is
the same as that found on existing premium golf mats, so
the same care and maintenance should be employed on the Flex-TrackTM turf to maximize the life expectancy.
If you have any questions please feel
free to contact our customer support center at 800-560-7795 or via Email at info@virtualturf.com.
|
Flex-TrackDS- (dual side)